Keywords:

Car locksmith tool

1

iKeycutter CONDOR XC-MINI Master Series Automatic Key Cutting Machine is powerful and professional key cutting tool.it is easily operated,support online updating.Here is Steps on Ford key with Condor XC-MINI Cutting Machine.

1.Start your condor xc-mini key cutting machine,Power-On Password: 123456
1
2.Find the right key blade.
2
3.Insert it.
3
4.Check the menu and find the right car model.
4
5.Then it will shows the detailed tooth wear.Next,click enter.
5
6.Lean the key.
7
7.Insert new key blade,click the circle one to cut new blade.
10

 

8

Automatic V8/X6 Key Cutting Machine can make new keys without original key. Latest version,support keys for different car brands.

v8/x6 key cutting machine user manual

Language :English + Italian + Portuguese + Spanish / Turkish + English

V8/X6 key Cutting Machine user instruction display in pictures:
1
2
3
4
5-1
5

6
7

8-1
8
What situation you can make keys with this V8/X6 key cutter?
1) You have the original key and make a new key:
When you start this machine, you will see the menu, just follow the menu prompt to enter the number to read key teeth step by step. Then you will get the new key
2) You lost all keys.
When you lost all original keys, enter the appropriate number of head lock, then follow the menu prompt to make new key.
3) Mainly used have the key with keyless lost data with the key.

 

4

This is a user manual for BMW Turbo Decoder HU92 at obd2express.
1
How to use Turbo Decoder HU92 for BMW
Open the gate (pull it out) before you start working with HU92 decoder
2
The Turbo wheel (last wheel) must be all the way to the LEFT
3
Reset all 8 pins to position 0, 4pins on each side of the tool
(that is, push the pins all the way DOWN)
4
Resetting complete

Every time you insert the tool in the lock or pull it out of the lock, the gate must be closed (PUSH IT IN) and the Turbo wheel must be RIGHT
Open the gate (pull it out), push the Tension wheel only to LEFT when insert the tool
5
NOTE: when there is NO tension in the Turbo wheel, it means that the tool is not inserte correctly. Please close the gate (push it in), turn the tool around and open the gate. Then also push the Tension wheel only to LEFT.
Start “pumping” by turning the Turbo wheel all the way to the LEFT & releasing the Tension wheel
Repeat the procedure above
It is unlocked

Close the gate, turn the Turbo wheel to the RIGHT and then put it out.

BMW models supported:
1/M1
E81 2007-2011
E82 2007-2013
E87 2004-2011
E88 2007-2014
3/M3
E46 2000-2004
E90 2005-2011
E92 2007-2012
E93 2007-2013
5/M5
E39 late models
E60 2003-2010
6
E63 2003-2010
E64 2003-2010
7
E38 late models
E65 2001-2008
E66 2001-2008
E67 2001-2008
E68 2001-2008
X1
E84 2009-2011
X5
E53 late models
E70 2006-2013
X6
E71 2008-2014
Z3/M Z9
E36 late models
E38 late models
Z4/M Z4
E85 2003-2008
E89 2009-2011
Some Range Rover also ok

 

 

5

Obd2express.co.uk today released the newest diagnostic tool to replace Intelligent Tester II IT2 for Toyota and Lexus – OTC GTS (IT3). Here is all about this new IT3.
5
Why the newest OTC GTS for Toyota can replace IT2? Please refer to the tabet of
“OTC GTS IT3 vs. Denso Intelligent Tester II

Products OTC GTS (IT3) Denso Intelligent Tester II (IT2)
Vhiecle coverage Toyota and Lexus after 2012 Toyota and Lexus before 2012
Vehicle identification YES NO
Online upate YES NO
Date keeper <60 minutes <30 minutes
DTC code YES NO
Monitored state YES NO
Health report YES NO
Multisystem YES NO
Loging system YES NO

*** GTS Software:
6
-software introduction: Global TechStream (GTS) is the next generation diagnostic tool Unlike the current diagnostic tool, Intelligent Tester II, GTS is a PC-based diagnostic tool. It consists of two components: GTS software and Vehicle Interface Module (VIM). GTS software is at the core of the diagnostic tool, and VIM is the communication gateway between GTS software and vehicle ECUs. These components enable technicians to diagnose and reprogram the vehicles

-software version:

GTS v10.10.018

– Languages:
English, German, French, Spanish, Italian and Chinese

– PC requirement for GTS 10.10.028:
Operating system (OS): WINDOWS XP/ VISTA/WIN7
CPU: Intel Pentium M1.2GHZ or higher
Memory: 1GB or more
Disk space: at least 256MB
Display resolution: 1024*768 (recommended) 1024*600 (lowest)
USB: at least one USB 2.0

*** OTC GTS firmware:
this package includes the OTC GTS host, a OBD cable, a USB cable and a CD.
7

8

9

10

14